2015年11月25日水曜日

人柱海外VPS メモリ2GB激安月5ユーロのVPSに契約してみた [dyjix.eu]

dyjix.eu
フランス系。
可もなく不可もなく。
サポートは異様に早くて、10分で返信が来る。


[email protected]:~# cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
stepping : 9
microcode : 21
cpu MHz : 3392.209
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf cpuid_faulting pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt
bogomips : 6784.41
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 58
model name : Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz
stepping : 9
microcode : 21
cpu MHz : 3392.209
cache size : 8192 KB
physical id : 0
siblings : 8
core id : 1
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf cpuid_faulting pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm ida arat pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase smep erms xsaveopt
bogomips : 6784.41
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

[email protected]:~# cat /proc/meminfo
MemTotal:        2097152 kB
MemFree:         1779020 kB
Cached:           226788 kB
Buffers:               0 kB
Active:           108768 kB
Inactive:         189064 kB
Active(anon):      11924 kB
Inactive(anon):   122872 kB
Active(file):      96844 kB
Inactive(file):    66192 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:        134796 kB
Shmem:             63752 kB
Slab:              20288 kB
SReclaimable:       9688 kB
SUnreclaim:        10600 kB
[email protected]:~# dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
16384+0 records in
16384+0 records out
1073741824 bytes (1.1 GB) copied, 1.20165 s, 894 MB/s
[email protected]:~#  wget -O /dev/null http://speedtest.dallas.linode.com/100MB-dallas.bin
converted 'http://speedtest.dallas.linode.com/100MB-dallas.bin' (ANSI_X3.4-1968) -> 'http://speedtest.dallas.linode.com/100MB-dallas.bin' (UTF-8)
--2015-11-25 04:45:13--  http://speedtest.dallas.linode.com/100MB-dallas.bin
Resolving speedtest.dallas.linode.com (speedtest.dallas.linode.com)... 2600:3c00::4b, 50.116.25.154
Connecting to speedtest.dallas.linode.com (speedtest.dallas.linode.com)|2600:3c00::4b|:80... failed: Permission denied.
Connecting to speedtest.dallas.linode.com (speedtest.dallas.linode.com)|50.116.25.154|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: '/dev/null'

/dev/null           100%[=====================>] 100.00M  7.71MB/s   in 16s  

2015-11-25 04:45:29 (6.41 MB/s) - '/dev/null' saved [104857600/104857600]

[email protected]:~#  wget -O /dev/null http://speedtest.tokyo.linode.com/100MB-tokyo.bin
converted 'http://speedtest.tokyo.linode.com/100MB-tokyo.bin' (ANSI_X3.4-1968) -> 'http://speedtest.tokyo.linode.com/100MB-tokyo.bin' (UTF-8)
--2015-11-25 04:45:34--  http://speedtest.tokyo.linode.com/100MB-tokyo.bin
Resolving speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)... 2400:8900::4b, 106.187.96.148
Connecting to speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)|2400:8900::4b|:80... failed: Permission denied.
Connecting to speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)|106.187.96.148|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: '/dev/null'

/dev/null           100%[=====================>] 100.00M  7.27MB/s   in 17s  

2015-11-25 04:45:53 (5.84 MB/s) - '/dev/null' saved [104857600/104857600]


[email protected]:~#  wget https://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz
converted 'https://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz' (ANSI_X3.4-1968) -> 'https://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz' (UTF-8)
--2015-11-25 04:47:32--  https://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz
Resolving byte-unixbench.googlecode.com (byte-unixbench.googlecode.com)... 2a00:1450:400c:c09::52, 64.233.166.82
Connecting to byte-unixbench.googlecode.com (byte-unixbench.googlecode.com)|2a00:1450:400c:c09::52|:443... failed: Permission denied.
Connecting to byte-unixbench.googlecode.com (byte-unixbench.googlecode.com)|64.233.166.82|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 143259 (140K) [application/x-gzip]
Saving to: 'UnixBench5.1.3.tgz.1'

UnixBench5.1.3.tgz. 100%[=====================>] 139.90K   436KB/s   in 0.3s

2015-11-25 04:47:33 (436 KB/s) - 'UnixBench5.1.3.tgz.1' saved [143259/143259]

[email protected]:~# tar xvf UnixBench5.1.3.tgz
UnixBench/
UnixBench/README
UnixBench/src/
UnixBench/src/looper.c
UnixBench/src/time-polling.c
UnixBench/src/arith.c
UnixBench/src/hanoi.c
UnixBench/src/timeit.c
UnixBench/src/dhry_1.c
UnixBench/src/dhry.h
UnixBench/src/dhry_2.c
UnixBench/src/fstime.c
UnixBench/src/syscall.c
UnixBench/src/execl.c
UnixBench/src/context1.c
UnixBench/src/whets.c
UnixBench/src/dummy.c
UnixBench/src/big.c
UnixBench/src/spawn.c
UnixBench/src/pipe.c
UnixBench/src/ubgears.c
UnixBench/pgms/
UnixBench/pgms/index.base
UnixBench/pgms/gfx-x11
UnixBench/pgms/multi.sh
UnixBench/pgms/unixbench.logo
UnixBench/pgms/tst.sh
UnixBench/WRITING_TESTS
UnixBench/.project
UnixBench/Run
UnixBench/testdir/
UnixBench/testdir/sort.src
UnixBench/testdir/cctest.c
UnixBench/testdir/dc.dat
UnixBench/testdir/large.txt
UnixBench/.cproject
UnixBench/results/
UnixBench/Makefile
UnixBench/USAGE
[email protected]:~#  cd UnixBench
[email protected]:~/UnixBench#  make
Checking distribution of files
./pgms  exists
./src  exists
./testdir  exists
./results  exists
gcc -o ./pgms/arithoh -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Darithoh ./src/arith.c
gcc -o ./pgms/register -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum='register int' ./src/arith.c
gcc -o ./pgms/short -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=short ./src/arith.c
gcc -o ./pgms/int -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=int ./src/arith.c
gcc -o ./pgms/long -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=long ./src/arith.c
gcc -o ./pgms/float -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=float ./src/arith.c
gcc -o ./pgms/double -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=double ./src/arith.c
gcc -o ./pgms/hanoi -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/hanoi.c
gcc -o ./pgms/syscall -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/syscall.c
./src/syscall.c: In function 'main':
./src/syscall.c:93:21: warning: null argument where non-null required (argument 2) [-Wnonnull]
                     execl("/bin/true", (char *) 0);
                     ^
gcc -o ./pgms/context1 -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/context1.c
gcc -o ./pgms/pipe -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/pipe.c
gcc -o ./pgms/spawn -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/spawn.c
gcc -o ./pgms/execl -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/execl.c
In file included from ./src/execl.c:34:0:
./src/big.c: In function 'getwork':
./src/big.c:452:11: warning: variable 'c' set but not used [-Wunused-but-set-variable]
     char  c;
           ^
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_1.c
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_2.c
gcc -o ./pgms/dhry2 -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/dhry_1.o ./src/dhry_2.o
cd ./src; rm -f dhry_1.o dhry_2.o
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DREG=register -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_1.c -o dhry_1_reg.o
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DREG=register -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_2.c -o dhry_2_reg.o
gcc -o ./pgms/dhry2reg -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/dhry_1_reg.o ./src/dhry_2_reg.o
cd ./src; rm -f dhry_1_reg.o dhry_2_reg.o
gcc -o ./pgms/looper -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/looper.c
gcc -o ./pgms/fstime -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/fstime.c
gcc -o ./pgms/whetstone-double -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -DDP -DUNIX -DUNIXBENCH ./src/whets.c -lm
[email protected]:~/UnixBench#  ./Run
make all
make[1]: Entering directory '/root/UnixBench'
Checking distribution of files
./pgms  exists
./src  exists
./testdir  exists
./tmp  exists
./results  exists
make[1]: Leaving directory '/root/UnixBench'
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
sh: 1: 3dinfo: not found

   #    #  #    #  #  #    #          #####   ######  #    #   ####   #    #
   #    #  ##   #  #   #  #           #    #  #       ##   #  #    #  #    #
   #    #  # #  #  #    ##            #####   #####   # #  #  #       ######
   #    #  #  # #  #    ##            #    #  #       #  # #  #       #    #
   #    #  #   ##  #   #  #           #    #  #       #   ##  #    #  #    #
    ####   #    #  #  #    #          #####   ######  #    #   ####   #    #

   Version 5.1.3                      Based on the Byte Magazine Unix Benchmark

   Multi-CPU version                  Version 5 revisions by Ian Smith,
                                      Sunnyvale, CA, USA
   January 13, 2011                   johantheghost at yahoo period com


1 x Dhrystone 2 using register variables  1 2 3 4 5 6 7 8 9 10

1 x Double-Precision Whetstone  1 2 3 4 5 6 7 8 9 10

1 x Execl Throughput  1 2 3

1 x File Copy 1024 bufsize 2000 maxblocks  1 2 3

1 x File Copy 256 bufsize 500 maxblocks  1 2 3

1 x File Copy 4096 bufsize 8000 maxblocks  1 2 3

1 x Pipe Throughput  1 2 3 4 5 6 7 8 9 10

1 x Pipe-based Context Switching  1 2 3 4 5 6 7 8 9 10

1 x Process Creation  1 2 3

1 x System Call Overhead  1 2 3 4 5 6 7 8 9 10

1 x Shell Scripts (1 concurrent)  1 2 3

1 x Shell Scripts (8 concurrent)  1 2 3

2 x Dhrystone 2 using register variables  1 2 3 4 5 6 7 8 9 10

2 x Double-Precision Whetstone  1 2 3 4 5 6 7 8 9 10

2 x Execl Throughput  1 2 3

2 x File Copy 1024 bufsize 2000 maxblocks  1 2 3

2 x File Copy 256 bufsize 500 maxblocks  1 2 3

2 x File Copy 4096 bufsize 8000 maxblocks  1 2 3

2 x Pipe Throughput  1 2 3 4 5 6 7 8 9 10

2 x Pipe-based Context Switching  1 2 3 4 5 6 7 8 9 10

2 x Process Creation  1 2 3

2 x System Call Overhead  1 2 3 4 5 6 7 8 9 10

2 x Shell Scripts (1 concurrent)  1 2 3

2 x Shell Scripts (8 concurrent)  1 2 3

========================================================================
   BYTE UNIX Benchmarks (Version 5.1.3)

   System: hani3: GNU/Linux
   OS: GNU/Linux -- 2.6.32-042stab111.12 -- #1 SMP Thu Sep 17 11:38:20 MSK 2015
   Machine: x86_64 (unknown)
   Language: en_US.utf8 (charmap="ANSI_X3.4-1968", collate="ANSI_X3.4-1968")
   CPU 0: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (6784.4 bogomips)
          Hyper-Threading, x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET, Intel virtualization
   CPU 1: Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz (6784.4 bogomips)
          Hyper-Threading, x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET, Intel virtualization
   04:48:01 up 4 days,  3:09,  1 user,  load average: 0.07, 0.02, 0.00; runlevel 5

------------------------------------------------------------------------
Benchmark Run: Wed Nov 25 2015 04:48:01 - 05:16:44
2 CPUs in system; running 1 parallel copy of tests

Dhrystone 2 using register variables       35592843.9 lps   (10.0 s, 7 samples)
Double-Precision Whetstone                     4597.8 MWIPS (9.6 s, 7 samples)
Execl Throughput                               4019.6 lps   (29.4 s, 2 samples)
File Copy 1024 bufsize 2000 maxblocks        756634.3 KBps  (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks          214442.2 KBps  (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks       1835457.0 KBps  (30.0 s, 2 samples)
Pipe Throughput                             1555303.0 lps   (10.0 s, 7 samples)
Pipe-based Context Switching                 278025.4 lps   (10.0 s, 7 samples)
Process Creation                              10969.1 lps   (30.0 s, 2 samples)
Shell Scripts (1 concurrent)                   7955.8 lpm   (60.0 s, 2 samples)
Shell Scripts (8 concurrent)                   1544.9 lpm   (60.1 s, 2 samples)
System Call Overhead                        2421720.4 lps   (10.0 s, 7 samples)

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   35592843.9   3049.9
Double-Precision Whetstone                       55.0       4597.8    836.0
Execl Throughput                                 43.0       4019.6    934.8
File Copy 1024 bufsize 2000 maxblocks          3960.0     756634.3   1910.7
File Copy 256 bufsize 500 maxblocks            1655.0     214442.2   1295.7
File Copy 4096 bufsize 8000 maxblocks          5800.0    1835457.0   3164.6
Pipe Throughput                               12440.0    1555303.0   1250.2
Pipe-based Context Switching                   4000.0     278025.4    695.1
Process Creation                                126.0      10969.1    870.6
Shell Scripts (1 concurrent)                     42.4       7955.8   1876.4
Shell Scripts (8 concurrent)                      6.0       1544.9   2574.9
System Call Overhead                          15000.0    2421720.4   1614.5
                                                                   ========
System Benchmarks Index Score                                        1479.7

------------------------------------------------------------------------
Benchmark Run: Wed Nov 25 2015 05:16:44 - 05:45:34
2 CPUs in system; running 2 parallel copies of tests

Dhrystone 2 using register variables       55832475.1 lps   (10.0 s, 7 samples)
Double-Precision Whetstone                     8664.4 MWIPS (9.6 s, 7 samples)
Execl Throughput                               9052.8 lps   (29.6 s, 2 samples)
File Copy 1024 bufsize 2000 maxblocks        813631.9 KBps  (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks          232097.8 KBps  (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks       2210935.1 KBps  (30.0 s, 2 samples)
Pipe Throughput                             2596862.6 lps   (10.0 s, 7 samples)
Pipe-based Context Switching                 435246.6 lps   (10.0 s, 7 samples)
Process Creation                              19123.9 lps   (30.0 s, 2 samples)
Shell Scripts (1 concurrent)                  13638.8 lpm   (60.0 s, 2 samples)
Shell Scripts (8 concurrent)                   1793.7 lpm   (60.0 s, 2 samples)
System Call Overhead                        3583135.9 lps   (10.0 s, 7 samples)

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   55832475.1   4784.3
Double-Precision Whetstone                       55.0       8664.4   1575.3
Execl Throughput                                 43.0       9052.8   2105.3
File Copy 1024 bufsize 2000 maxblocks          3960.0     813631.9   2054.6
File Copy 256 bufsize 500 maxblocks            1655.0     232097.8   1402.4
File Copy 4096 bufsize 8000 maxblocks          5800.0    2210935.1   3812.0
Pipe Throughput                               12440.0    2596862.6   2087.5
Pipe-based Context Switching                   4000.0     435246.6   1088.1
Process Creation                                126.0      19123.9   1517.8
Shell Scripts (1 concurrent)                     42.4      13638.8   3216.7
Shell Scripts (8 concurrent)                      6.0       1793.7   2989.6
System Call Overhead                          15000.0    3583135.9   2388.8
                                                                   ========
System Benchmarks Index Score                                        2213.1






人柱海外VPS 激安月5ドルKVMVPSに契約してみた [directspace.net]

directspace
http://directspace.net/services/virtual/kvmfeatures.php
日本からの通信速度遅い(portland)
コンパネに割とバグがある。
サポート反応は1日ほど、海外系にしては遅め?

ベンチ一覧

[email protected]:~# df -h
Filesystem                                              Size  Used Avail Use% Mounted on
rootfs                                                  2.0G  1.8G   60M  97% /
udev                                                     10M     0   10M   0% /dev
tmpfs                                                   202M  512K  201M   1% /run
/dev/disk/by-uuid/2693e0aa-1059-4ca7-b870-7dec17345b64  2.0G  1.8G   60M  97% /
tmpfs                                                   5.0M     0  5.0M   0% /run/lock
tmpfs                                                   403M     0  403M   0% /run/shm
[email protected]:~# resize2fs /dev/vda1
resize2fs 1.42.5 (29-Jul-2012)
Filesystem at /dev/vda1 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 4
Performing an on-line resize of /dev/vda1 to 14417920 (4k) blocks.
The filesystem on /dev/vda1 is now 14417920 blocks long.

[email protected]:~# df -h
Filesystem                                              Size  Used Avail Use% Mounted on
rootfs                                                   55G  1.8G   50G   4% /
udev                                                     10M     0   10M   0% /dev
tmpfs                                                   202M  512K  201M   1% /run
/dev/disk/by-uuid/2693e0aa-1059-4ca7-b870-7dec17345b64   55G  1.8G   50G   4% /
tmpfs                                                   5.0M     0  5.0M   0% /run/lock
tmpfs                                                   403M     0  403M   0% /run/shm


[email protected]:~#  dd if=/dev/zero of=test bs=64k count=16k conv=fdatasync
16384+0 records in
16384+0 records out
1073741824 bytes (1.1 GB) copied, 53.1105 s, 20.2 MB/s


No VNC extension on display :0
[email protected]:~# vncconfig
No VNC extension on display :0
[email protected]:~# ufw
bash: ufw: command not found
[email protected]:~#  wget -O /dev/null http://speedtest.dallas.linode.com/100MB-dallas.bin
--2015-11-13 02:49:19--  http://speedtest.dallas.linode.com/100MB-dallas.bin
Resolving speedtest.dallas.linode.com (speedtest.dallas.linode.com)... 2600:3c00::4b, 50.116.25.154
Connecting to speedtest.dallas.linode.com (speedtest.dallas.linode.com)|2600:3c00::4b|:80... failed: No route to host.
Connecting to speedtest.dallas.linode.com (speedtest.dallas.linode.com)|50.116.25.154|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: `/dev/null'

100%[======================================>] 104,857,600 3.59M/s   in 31s  

2015-11-13 02:49:53 (3.26 MB/s) - `/dev/null' saved [104857600/104857600]

[email protected]:~#  wget -O /dev/null http://speedtest.tokyo.linode.com/100MB-tokyo.bin
--2015-11-13 02:49:58--  http://speedtest.tokyo.linode.com/100MB-tokyo.bin
Resolving speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)... 2400:8900::4b, 106.187.96.148
Connecting to speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)|2400:8900::4b|:80... failed: No route to host.
Connecting to speedtest.tokyo.linode.com (speedtest.tokyo.linode.com)|106.187.96.148|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 104857600 (100M) [application/octet-stream]
Saving to: `/dev/null'

100%[======================================>] 104,857,600 2.33M/s   in 57s  

2015-11-13 02:50:58 (1.77 MB/s) - `/dev/null' saved [104857600/104857600]

[email protected]:~# apt-get  install perl perl-Time-HiRes make gcc
Reading package lists... Done
Building dependency tree    
Reading state information... Done
E: Unable to locate package perl-Time-HiRes
[email protected]:~# apt-get  install perl  make gcc
Reading package lists... Done
Building dependency tree    
Reading state information... Done
perl is already the newest version.
perl set to manually installed.
The following extra packages will be installed:
  binutils gcc-4.7 libc-bin libc-dev-bin libc6 libc6-dev libitm1 libquadmath0
  linux-libc-dev manpages-dev
Suggested packages:
  binutils-doc gcc-multilib autoconf automake1.9 libtool flex bison gdb
  gcc-doc gcc-4.7-multilib libmudflap0-4.7-dev gcc-4.7-doc gcc-4.7-locales
  libgcc1-dbg libgomp1-dbg libitm1-dbg libquadmath0-dbg libmudflap0-dbg
  libcloog-ppl0 libppl-c2 libppl7 binutils-gold glibc-doc make-doc
The following NEW packages will be installed:
  binutils gcc gcc-4.7 libc-dev-bin libc6-dev libitm1 libquadmath0
  linux-libc-dev make manpages-dev
The following packages will be upgraded:
  libc-bin libc6
2 upgraded, 10 newly installed, 0 to remove and 57 not upgraded.
Need to get 24.7 MB of archives.
After this operation, 50.8 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.us.debian.org/debian/ wheezy/main libc-bin amd64 2.13-38+deb7u8 [1,274 kB]
Get:2 http://ftp.us.debian.org/debian/ wheezy/main libc6 amd64 2.13-38+deb7u8 [4,335 kB]
Get:3 http://security.debian.org/ wheezy/updates/main linux-libc-dev amd64 3.2.68-1+deb7u6 [838 kB]
Get:4 http://ftp.us.debian.org/debian/ wheezy/main libitm1 amd64 4.7.2-5 [36.6 kB]
Get:5 http://ftp.us.debian.org/debian/ wheezy/main libquadmath0 amd64 4.7.2-5 [125 kB]
Get:6 http://ftp.us.debian.org/debian/ wheezy/main binutils amd64 2.22-8+deb7u2 [4,793 kB]
Get:7 http://ftp.us.debian.org/debian/ wheezy/main gcc-4.7 amd64 4.7.2-5 [8,296 kB]
Get:8 http://ftp.us.debian.org/debian/ wheezy/main gcc amd64 4:4.7.2-1 [5,064 B]
Get:9 http://ftp.us.debian.org/debian/ wheezy/main libc-dev-bin amd64 2.13-38+deb7u8 [226 kB]
Get:10 http://ftp.us.debian.org/debian/ wheezy/main libc6-dev amd64 2.13-38+deb7u8 [2,665 kB]
Get:11 http://ftp.us.debian.org/debian/ wheezy/main make amd64 3.81-8.2 [396 kB]
Get:12 http://ftp.us.debian.org/debian/ wheezy/main manpages-dev all 3.44-1 [1,737 kB]
Fetched 24.7 MB in 17s (1,379 kB/s)                                          
Preconfiguring packages ...
(Reading database ... 69539 files and directories currently installed.)
Preparing to replace libc-bin 2.13-38 (using .../libc-bin_2.13-38+deb7u8_amd64.deb) ...
Unpacking replacement libc-bin ...
Processing triggers for man-db ...
Setting up libc-bin (2.13-38+deb7u8) ...
(Reading database ... 69539 files and directories currently installed.)
Preparing to replace libc6:amd64 2.13-38 (using .../libc6_2.13-38+deb7u8_amd64.deb) ...
Unpacking replacement libc6:amd64 ...
Setting up libc6:amd64 (2.13-38+deb7u8) ...
Selecting previously unselected package libitm1:amd64.
(Reading database ... 69539 files and directories currently installed.)
Unpacking libitm1:amd64 (from .../libitm1_4.7.2-5_amd64.deb) ...
Selecting previously unselected package libquadmath0:amd64.
Unpacking libquadmath0:amd64 (from .../libquadmath0_4.7.2-5_amd64.deb) ...
Selecting previously unselected package binutils.
Unpacking binutils (from .../binutils_2.22-8+deb7u2_amd64.deb) ...
Selecting previously unselected package gcc-4.7.
Unpacking gcc-4.7 (from .../gcc-4.7_4.7.2-5_amd64.deb) ...
Selecting previously unselected package gcc.
Unpacking gcc (from .../gcc_4%3a4.7.2-1_amd64.deb) ...
Selecting previously unselected package libc-dev-bin.
Unpacking libc-dev-bin (from .../libc-dev-bin_2.13-38+deb7u8_amd64.deb) ...
Selecting previously unselected package linux-libc-dev:amd64.
Unpacking linux-libc-dev:amd64 (from .../linux-libc-dev_3.2.68-1+deb7u6_amd64.deb) ...
Selecting previously unselected package libc6-dev:amd64.
Unpacking libc6-dev:amd64 (from .../libc6-dev_2.13-38+deb7u8_amd64.deb) ...
Selecting previously unselected package make.
Unpacking make (from .../make_3.81-8.2_amd64.deb) ...
Selecting previously unselected package manpages-dev.
Unpacking manpages-dev (from .../manpages-dev_3.44-1_all.deb) ...
Processing triggers for man-db ...
Setting up libitm1:amd64 (4.7.2-5) ...
Setting up libquadmath0:amd64 (4.7.2-5) ...
Setting up binutils (2.22-8+deb7u2) ...
Setting up gcc-4.7 (4.7.2-5) ...
Setting up gcc (4:4.7.2-1) ...
Setting up libc-dev-bin (2.13-38+deb7u8) ...
Setting up linux-libc-dev:amd64 (3.2.68-1+deb7u6) ...
Setting up libc6-dev:amd64 (2.13-38+deb7u8) ...
Setting up make (3.81-8.2) ...
Setting up manpages-dev (3.44-1) ...
[email protected]:~#  curl http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz | tar zx
bash: curl: command not found

gzip: stdin: unexpected end of file
tar: Child returned status 1
tar: Error is not recoverable: exiting now
[email protected]:~# apt-get install curl
Reading package lists... Done
Building dependency tree    
Reading state information... Done
The following extra packages will be installed:
  libcurl3
The following NEW packages will be installed:
  curl libcurl3
0 upgraded, 2 newly installed, 0 to remove and 57 not upgraded.
Need to get 601 kB of archives.
After this operation, 989 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://ftp.us.debian.org/debian/ wheezy/main libcurl3 amd64 7.26.0-1+wheezy13 [331 kB]
Get:2 http://ftp.us.debian.org/debian/ wheezy/main curl amd64 7.26.0-1+wheezy13 [270 kB]
Fetched 601 kB in 3s (156 kB/s)
Selecting previously unselected package libcurl3:amd64.
(Reading database ... 73006 files and directories currently installed.)
Unpacking libcurl3:amd64 (from .../libcurl3_7.26.0-1+wheezy13_amd64.deb) ...
Selecting previously unselected package curl.
Unpacking curl (from .../curl_7.26.0-1+wheezy13_amd64.deb) ...
Processing triggers for man-db ...
Setting up libcurl3:amd64 (7.26.0-1+wheezy13) ...
Setting up curl (7.26.0-1+wheezy13) ...
[email protected]:~#  curl http://byte-unixbench.googlecode.com/files/UnixBench5.1.3.tgz | tar zx
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  139k  100  139k    0     0  45629      0  0:00:03  0:00:03 --:--:-- 67638
[email protected]:~# ls
a  Desktop  test  UnixBench
[email protected]:~# cd UnixBench
[email protected]:~/UnixBench# ./Run
gcc -o ./pgms/arithoh -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Darithoh ./src/arith.c
gcc -o ./pgms/register -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum='register int' ./src/arith.c
gcc -o ./pgms/short -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=short ./src/arith.c
gcc -o ./pgms/int -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=int ./src/arith.c
gcc -o ./pgms/long -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=long ./src/arith.c
gcc -o ./pgms/float -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=float ./src/arith.c
gcc -o ./pgms/double -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -Ddatum=double ./src/arith.c
gcc -o ./pgms/hanoi -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/hanoi.c
gcc -o ./pgms/syscall -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/syscall.c
./src/syscall.c: In function ‘main’:
./src/syscall.c:93:21: warning: null argument where non-null required (argument 2) [-Wnonnull]
gcc -o ./pgms/context1 -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/context1.c
gcc -o ./pgms/pipe -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/pipe.c
gcc -o ./pgms/spawn -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/spawn.c
gcc -o ./pgms/execl -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/execl.c
In file included from ./src/execl.c:34:0:
./src/big.c: In function ‘getwork’:
./src/big.c:452:11: warning: variable ‘c’ set but not used [-Wunused-but-set-variable]
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_1.c
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_2.c
gcc -o ./pgms/dhry2 -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/dhry_1.o ./src/dhry_2.o
cd ./src; rm -f dhry_1.o dhry_2.o
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DREG=register -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_1.c -o dhry_1_reg.o
cd ./src; gcc -c -DTIME -Wall -pedantic -ansi -DREG=register -DHZ= -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall dhry_2.c -o dhry_2_reg.o
gcc -o ./pgms/dhry2reg -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/dhry_1_reg.o ./src/dhry_2_reg.o
cd ./src; rm -f dhry_1_reg.o dhry_2_reg.o
gcc -o ./pgms/looper -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/looper.c
gcc -o ./pgms/fstime -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall ./src/fstime.c
gcc -o ./pgms/whetstone-double -DTIME -Wall -pedantic -ansi -O2 -fomit-frame-pointer -fforce-addr -ffast-math -Wall -DDP -DUNIX -DUNIXBENCH ./src/whets.c -lm
make all
make[1]: Entering directory `/root/UnixBench'
Checking distribution of files
./pgms  exists
./src  exists
./testdir  exists
./results  exists
make[1]: Leaving directory `/root/UnixBench'
sh: 1: 3dinfo: not found

   #    #  #    #  #  #    #          #####   ######  #    #   ####   #    #
   #    #  ##   #  #   #  #           #    #  #       ##   #  #    #  #    #
   #    #  # #  #  #    ##            #####   #####   # #  #  #       ######
   #    #  #  # #  #    ##            #    #  #       #  # #  #       #    #
   #    #  #   ##  #   #  #           #    #  #       #   ##  #    #  #    #
    ####   #    #  #  #    #          #####   ######  #    #   ####   #    #

   Version 5.1.3                      Based on the Byte Magazine Unix Benchmark

   Multi-CPU version                  Version 5 revisions by Ian Smith,
                                      Sunnyvale, CA, USA
   January 13, 2011                   johantheghost at yahoo period com


1 x Dhrystone 2 using register variables  1
 2


 3 4 5 6 7 8 9 10

1 x Double-Precision Whetstone  1 2 3 4 5 6 7 8 9 10

1 x Execl Throughput  1 2 3

1 x File Copy 1024 bufsize 2000 maxblocks  1 2 3

1 x File Copy 256 bufsize 500 maxblocks  1 2 3

1 x File Copy 4096 bufsize 8000 maxblocks  1 2 3

1 x Pipe Throughput  1 2 3 4 5 6 7 8 9 10

1 x Pipe-based Context Switching  1 2 3 4 5 6 7 8 9 10

1 x Process Creation  1 2 3

1 x System Call Overhead  1 2 3 4 5 6 7 8 9 10

1 x Shell Scripts (1 concurrent)  1 2 3

1 x Shell Scripts (8 concurrent)  1 2 3

4 x Dhrystone 2 using register variables  1 2 3 4 5 6 7 8 9 10

4 x Double-Precision Whetstone  1 2 3 4 5 6 7 8 9 10

4 x Execl Throughput  1 2 3

4 x File Copy 1024 bufsize 2000 maxblocks  1 2 3

4 x File Copy 256 bufsize 500 maxblocks  1 2 3

4 x File Copy 4096 bufsize 8000 maxblocks  1 2 3

4 x Pipe Throughput  1 2 3 4 5 6 7 8 9 10

4 x Pipe-based Context Switching  1 2 3 4 5 6 7 8 9 10

4 x Process Creation  1 2 3

4 x System Call Overhead  1 2 3 4 5 6 7 8 9 10

4 x Shell Scripts (1 concurrent)  1 2 3

4 x Shell Scripts (8 concurrent)  1 2 3

========================================================================
   BYTE UNIX Benchmarks (Version 5.1.3)

   System: localhost.localdomain: GNU/Linux
   OS: GNU/Linux -- 3.2.0-4-amd64 -- #1 SMP Debian 3.2.41-2
   Machine: x86_64 (unknown)
   Language: en_US.utf8 (charmap="UTF-8", collate="UTF-8")
   CPU 0: QEMU Virtual CPU version (cpu64-rhel6) (4000.0 bogomips)
          x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET
   CPU 1: QEMU Virtual CPU version (cpu64-rhel6) (4000.0 bogomips)
          x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET
   CPU 2: QEMU Virtual CPU version (cpu64-rhel6) (4000.0 bogomips)
          x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET
   CPU 3: QEMU Virtual CPU version (cpu64-rhel6) (4000.0 bogomips)
          x86-64, MMX, Physical Address Ext, SYSENTER/SYSEXIT, SYSCALL/SYSRET
   02:53:40 up  7:52,  2 users,  load average: 0.20, 0.21, 0.18; runlevel 2

------------------------------------------------------------------------
Benchmark Run: Fri Nov 13 2015 02:53:40 - 03:21:31
4 CPUs in system; running 1 parallel copy of tests

Dhrystone 2 using register variables       19447523.5 lps   (10.0 s, 7 samples)
Double-Precision Whetstone                     2426.1 MWIPS (9.7 s, 7 samples)
Execl Throughput                               1546.2 lps   (30.0 s, 2 samples)
File Copy 1024 bufsize 2000 maxblocks        603223.4 KBps  (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks          180661.4 KBps  (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks       1313151.7 KBps  (30.0 s, 2 samples)
Pipe Throughput                             1386608.4 lps   (10.0 s, 7 samples)
Pipe-based Context Switching                 233304.3 lps   (10.0 s, 7 samples)
Process Creation                               3893.9 lps   (30.0 s, 2 samples)
Shell Scripts (1 concurrent)                   4303.6 lpm   (60.0 s, 2 samples)
Shell Scripts (8 concurrent)                   1659.3 lpm   (60.0 s, 2 samples)
System Call Overhead                        2455035.9 lps   (10.0 s, 7 samples)

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   19447523.5   1666.5
Double-Precision Whetstone                       55.0       2426.1    441.1
Execl Throughput                                 43.0       1546.2    359.6
File Copy 1024 bufsize 2000 maxblocks          3960.0     603223.4   1523.3
File Copy 256 bufsize 500 maxblocks            1655.0     180661.4   1091.6
File Copy 4096 bufsize 8000 maxblocks          5800.0    1313151.7   2264.1
Pipe Throughput                               12440.0    1386608.4   1114.6
Pipe-based Context Switching                   4000.0     233304.3    583.3
Process Creation                                126.0       3893.9    309.0
Shell Scripts (1 concurrent)                     42.4       4303.6   1015.0
Shell Scripts (8 concurrent)                      6.0       1659.3   2765.5
System Call Overhead                          15000.0    2455035.9   1636.7
                                                                   ========
System Benchmarks Index Score                                         992.9

------------------------------------------------------------------------
Benchmark Run: Fri Nov 13 2015 03:21:31 - 03:49:28
4 CPUs in system; running 4 parallel copies of tests

Dhrystone 2 using register variables       71037705.6 lps   (10.0 s, 7 samples)
Double-Precision Whetstone                     9802.1 MWIPS (9.5 s, 7 samples)
Execl Throughput                               8540.1 lps   (30.0 s, 2 samples)
File Copy 1024 bufsize 2000 maxblocks        480556.9 KBps  (30.0 s, 2 samples)
File Copy 256 bufsize 500 maxblocks          145677.9 KBps  (30.0 s, 2 samples)
File Copy 4096 bufsize 8000 maxblocks       1101322.4 KBps  (30.0 s, 2 samples)
Pipe Throughput                             5097320.1 lps   (10.0 s, 7 samples)
Pipe-based Context Switching                 762711.2 lps   (10.0 s, 7 samples)
Process Creation                              24253.4 lps   (30.0 s, 2 samples)
Shell Scripts (1 concurrent)                  15343.8 lpm   (60.0 s, 2 samples)
Shell Scripts (8 concurrent)                   2249.3 lpm   (60.1 s, 2 samples)
System Call Overhead                        3259494.8 lps   (10.0 s, 7 samples)

System Benchmarks Index Values               BASELINE       RESULT    INDEX
Dhrystone 2 using register variables         116700.0   71037705.6   6087.2
Double-Precision Whetstone                       55.0       9802.1   1782.2
Execl Throughput                                 43.0       8540.1   1986.1
File Copy 1024 bufsize 2000 maxblocks          3960.0     480556.9   1213.5
File Copy 256 bufsize 500 maxblocks            1655.0     145677.9    880.2
File Copy 4096 bufsize 8000 maxblocks          5800.0    1101322.4   1898.8
Pipe Throughput                               12440.0    5097320.1   4097.5
Pipe-based Context Switching                   4000.0     762711.2   1906.8
Process Creation                                126.0      24253.4   1924.9
Shell Scripts (1 concurrent)                     42.4      15343.8   3618.8
Shell Scripts (8 concurrent)                      6.0       2249.3   3748.8
System Call Overhead                          15000.0    3259494.8   2173.0
                                                                   ========
System Benchmarks Index Score                                        2276.5

[email protected]:~/UnixBench#






無料のMinecraftPEマルチプレイサーバーのMiRmMCPE運営して早2ヵ月...

どうも。はにおかさいです。 MiRmを運営して早く、2ヵ月経ちました。6月14日から運用しています。 mirm.info とは、MinecraftPE/PCの完全無料のレンタルサーバーです。 プラグインはすでにいれてあるものを使えます。 そもそも、MiRmの名前の...